المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : External TPMS T801 LCD screen displays pressure and temperature of 4 tires synchronou



Eng Amr Adel
05-06-2016, 20:43
External TPMS T801
LCD screen displays pressure and temperature of 4 tires synchronously.

https://www.rise.company/forum/images/imported/2016/06/7.jpg
https://www.rise.company/forum/images/imported/2016/06/8.jpg

TPMS External (http://www.pke.hk/products_view.asp?id=76) T801/T801A Features:
1.Real-time monitor tires’ pressure and temperature.
2.LED displayer, exquisite & compact LCD screen displays pressure and temperature of 4 tires synchronously.
3.Blue LCD displayer with cigarette plug or cigarette plug wire.
4.Visual and audible warning for abnormal tire pressure and temperature, low pressure alarm, high pressure alarm, air leak alarm, high temperature alarm and sensor failure alarm.
5.Easy-to-install TPMS, 2 minutes installation.
6.Sensor with long battery life (5 years) and sensor battery can be easily replaced.
7.Stable wireless signal transmission.
https://www.rise.company/forum/images/imported/2016/06/9.jpg
https://www.rise.company/forum/images/imported/2016/06/10.jpg
https://www.rise.company/forum/images/imported/2016/06/11.jpg


https://www.rise.company/forum/images/imported/2016/06/12.jpg
Fully integrated Sensor for TPMS
The SP37 is a highly integrated device which performs all necessary functions for a Tire Pressure Monitoring System (TPMS) wheel module suited for high-volume applications.


https://www.rise.company/forum/images/imported/2016/06/13.jpg
LED displayer
Real-time monitor tires’ pressure and temperature. low pressure alarm, high pressure alarm, air leak alarm, high temperature alarm and sensor failure alarm.


https://www.rise.company/forum/images/imported/2016/06/14.jpg
TPMS External Sensor
Wireless data transmitting,Sensor with long battery life (>5 years) and sensor battery can be easily replaced.


https://www.rise.company/forum/images/imported/2016/06/15.jpg
Easy-to-install TPMS
2 minutes installation. anti-interference


https://www.rise.company/forum/images/imported/2016/06/16.jpg
https://www.rise.company/forum/images/imported/2016/06/1.gif
https://www.rise.company/forum/images/imported/2016/06/17.jpg
https://www.rise.company/forum/images/imported/2016/06/18.jpg
EXT TPMS sensor install show
1.Spin out gas nipple cover, and clean up the dust of gas nipple cover to ensure that the gas nipple dry without water.
2.Precession hex nuts .
3.According to the location identifier of sensor housing, screwed into the corresponding tires and tighten
4.Nut wrench reverse approximation sensor until it does not leak.
5.EXT TPMS sensor exchange cell
Replacing the battery 5 to 7 years later
1.Loosen hex nuts
2.Spin out the sensor
3.Remove the tamper gasket
4.Use the open wrench unscrew the housing
5.Replace it with a new button-type battery
6.Reverse operation, and install the sensor again
https://www.rise.company/forum/images/imported/2016/06/19.jpg
https://www.rise.company/forum/images/imported/2016/06/20.jpg