المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : الموبايل يستقبل ولايتصل you cannot make outgoing calls while call barring is on



Rise Company
05-06-2017, 15:03
الموبايل يستقبل ولايتصل you cannot make outgoing calls while call barring is on

الموبايل يستقبل ماكلمات ولكن لا يتصل و تظهر لي هذه الرسالة
you cannot make outgoing calls while call barring is on
في العادة بسبب عدم السداد للفاتورة أو إنتهاء الشحن أو تجاوز الحد الإئتماني


https://www.rise.company/forum/images/imported/2017/06/1.jpg



Account Troubleshooting



[*=left]For prepaid, check if you have sufficient load balance.
[*=left]If registered to a subscription or promo, check if your subscription requires a maintaining balance and if your load satisfies the maintaining balance.
[*=left]For postpaid, check if your account is already redirected. If you try making a call while your account is redirected, you will hear a voice message informing you of your account status.


Signal Troubleshooting



[*=left]If you have low signal reception, try shifting locations, preferably somewhere more open and with less surrounding obstacles such as concrete walls.
[*=left]If your LTE is turned ON, your phone should automatically shift to 3G or 2G when trying to make an outgoing call or when receiving an incoming call. If your device fails to automatically shift to 3G or 2G, go to your phones mobile network settings and manually select 3G or 2G.


Device Troubleshooting



[*=left]Refresh handset by turning it OFF and then back ON.
[*=left]Go to your phones call settings and disable fixed dialing setting.
[*=left]Disable call barring setting.
[*=left]Check Caller ID setting and make sure it is set to Show/Enabled.


SIM Troubleshooting

Transfer SIM to another working device to check if outgoing calls will work.



Go to Settings > Applications >Settings > Call > Additional Settings > Caller ID > make sure "Network default" is selected.



Disable Incoming Calls (Call Barring) on Samsung Galaxy



This wiki was split from the "How to disable TalkBack Mode" wiki into its own page because it is a different feature. Disabling incoming/outgoing calls is sometimes necessary. If you want to ensure your device is never used to make long-distance or international calls, call barring is a reliable option. This can prove handy when you need to keep your phone's minutes down and can stop you from getting a surprise bill one month with a bunch of racked-up long-distance charges. If you were to temporarily lose your device, you can be sure it won't be used in an international calling spree. *Please Read* Call barring is a function that's controlled by your mobile service provider. Although the steps below will show you how to access and enable call barring, you'll still need to obtain a pin code/password from your carrier to use this feature.

Method 1: Marshmallow






1
From the home screen, tap the phone icon.
https://www.rise.company/forum/images/imported/2017/06/4.png (http://visihow.com/File:Call_Forwarding_on_Galaxy_S4_01m.png)


2
Inside the phone app, tap the three-dot menu, then tap "Settings".
https://www.rise.company/forum/images/imported/2017/06/5.png (http://visihow.com/File:Call_Forwarding_on_Galaxy_S4_02m.png)



3

Inside Settings, tap "Call".

https://www.rise.company/forum/images/imported/2017/06/6.png (http://visihow.com/File:Call_Forwarding_on_Galaxy_S4_03m.png)



4

On the Call settings screen, tap "More settings".

https://www.rise.company/forum/images/imported/2017/06/7.png (http://visihow.com/File:Call_Forwarding_on_Galaxy_S4_04m.png)


5
While viewing More settings, tap "Call barring".
https://www.rise.company/forum/images/imported/2017/06/8.png (http://visihow.com/File:Call_Barring_on_Galaxy_S4_05m.png)


6
Here on the Call barring screen, you can select your incoming/outgoing call settings
.

You'll be prompted to enter a password anytime you attempt to edit one of the five options.
https://www.rise.company/forum/images/imported/2017/06/9.png (http://visihow.com/File:Call_Barring_on_Galaxy_S4_06m.png)

Contact your mobile service provider to enable the feature and or obtain the password.



7
If you've obtained the password from your carrier, you can change it
.

Tap the three-dot menu in the upper left corner, followed by "Change password".
https://www.rise.company/forum/images/imported/2017/06/10.png (http://visihow.com/File:Call_Barring_on_Galaxy_S4_07m.png)

ملحوظة :

Barring code الافتراضى
1234 - 1111 - 0000

ولكن قد لا يعمل لان الشبكة التى تقدم خدمة التجوال لا تسمح لك بالتحكم به الا من خلال التواصل معهم وسيقوموا باعطائه لك

جرب تغيير الشريحة و جرب اعادة ضبط المصنع.

Rise Company
05-06-2017, 15:50
Do you have a sim pin ... if so try that..also try the normal 0000, 1234, 5555, 6666....If it sill is not working the only other thing i can suggest is a factory reset

This will restore your phone to it's factory conditions....

These are the step by step procedures on how to factory reset or hard reset the Samsung Galaxy S II, to return the phone to its original factory fresh default settings.

This may help and only advisable if experiencing frozen or hang up problems when using or opening some applications you previously installed on it.
Take note this will delete all data from the Samsung l9100 Galaxy S II as a result of this procedure. This process may or may not delete the data stored on the microSD memory card. Ensure to make a back up a copy of all important data before proceeding.


First do try to factory data reset the phone through the main menu settings.

1. On the main home screen, just select MENU
2. Select SETTINGS, then select PRIVACY
3. Select FACTORY DATA RESET
4. Select RESET PHONE
5. If the password is required,enter it. Then confirm by selecting ERASE EVERYTHING

IF the phone is hang up or frozen, Try to turn it off first and do a hard reset through key combinations.

1. If your Samsung Galaxy S II is frozen, Shut the POWER OFF, take the battery out and put it back again.
2. Hold the Volume Down button
3. Briefly Press and release the Power button
4. A menu will then appears that let you allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Quickly Press and release the Power button
7. Select Volume Up for YES and Volume Down for NO

If the above procedures doesn't work. try this another method:

1. Turn the POWER OFF, pull the battery out and put it back again.
2. Simultaneously press the Volume Up, Home and Power button
3. If the Samsung Symbol appears, release the Power button
4. A Boot Menu will then show, Use the volume up/down to choose and home to select.

Wait 'till the process completes, Once the wipe is completed, the Samsung Galaxy S II l9100 will then reboot. All the data you previously installed already been deleted and then the phone will then return to its original factory fresh default settings.

Rise Company
05-06-2017, 15:58
Call Barring service is provided by your carrier. Get the password from them.
If your carrier does not support it, you can't access it.