المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : توصيل مايك / ميكروفون Nvr - تركيب الصوت مع كاميرات IP



Rise Company
14-10-2017, 10:57
حصريا : شرح توصيل مايك بالـ Nvr لشركة Hikvision

تركيب و توصيل مايك / ميكروفون بالـ nvr - تركيب الصوت مع كاميرات المراقبة

Connecting a mic on a nvr

https://www.rise.company/forum/images/imported/2017/10/6.png

كنا قد شرحنا فى موضوع سابق التوصيل على Dvr
توصيل مايك / ميكروفون dvr - تركيب الصوت مع كاميرات المراقبة (https://www.rise.company/forum/threads/25575-%D8%AA%D9%88%D8%B5%D9%8A%D9%84-%D9%85%D8%A7%D9%8A%D9%83-%D9%85%D9%8A%D9%83%D8%B1%D9%88%D9%81%D9%88%D9%86-dvr-%D8%AA%D8%B1%D9%83%D9%8A%D8%A8-%D8%A7%D9%84%D8%B5%D9%88%D8%AA-%D9%85%D8%B9-%D9%83%D8%A7%D9%85%D9%8A%D8%B1%D8%A7%D8%AA-%D8%A7%D9%84%D9%85%D8%B1%D8%A7%D9%82%D8%A8%D8%A9)


I remember i had connected a Mic to the audio outputs at the back of dvr, but it seems like this is not the same on the NVR.

سيظهر معك video فقط ولن تستطيع تحويله الى Video and Audio

https://www.rise.company/forum/images/imported/2017/10/1.jpg?2 ​

هنا الامر مختلف فليست نفس الطريقة , رغم وجود نفس المخرج فى الجهاز Audio In

وعند توصيل مايك خارجى مثل : الجولف , لن يعمل معك اطلاقا.


So what is the Audio in - out connection for at the back of the NVR? is it useless?

مشكلة توصيل مايك بال NVR

المشكلة التى ستواجهك هى


I have connected a microphone to the Audio IN port, behind the nvr. But i cannot find any option in the web interface to enable it.. Also connected 3 ip cameras.
Listening also fails. At the record parameters of channel 1, just VIDEO is available, Video & Audio isnt..

حيث وظيفة مخرج Audio


Bi directional audio. You can "speak" from the NVR to any camera that has speaker or audio output.

و التسجيل الصوتى يكون مربوط هنا بالمايك المدمج مع الكاميرا و لا يمكن ربطه على NVR كما كان فى DVR


The encoding is done on the cameras end; if you want to have audio on a camera, you need either a camera with integrated microphone, or a camera with audio input and connect the microphone to the camera.

نعم يعمل على dvr و لا يعمل على Nvr و السبب هو اعتماد الصوت بيكون من الكاميرا Ip داخلها وليس من الجهاز


Nope, not the same. That is indeed how it works on DVRs, since the DVR will take the video feed+audio feed and encode it on a single stream. But with NVRs and IP cameras, the encoding is done by the camera, and it just sends a stream of 0s and 1s to the NVR.


حل مشكلة توصيل مايك بال NVR


https://www.rise.company/forum/images/imported/2017/10/6.jpg

شرح توصيل مايك الكاميرا ip بال NVR

https://www.rise.company/forum/images/imported/2017/10/7.jpg

Many multi-functional IP cameras have audio input and output to provide audio monitoring and recording functionalities. To connect the microphone to IP camera's audio input is not as complicated as you expect. However, in addition to the audio connection, the microphone requires power supply to work in many cases.
There are two types of microphones: Active and Passive.


Active microphones have a built-in pre-amp, and require power to operate.
Passive microphones do not have built-in amplifiers, however sometimes can require power.

1# Connecting a microphone to IP cameras

Active microphones
Depending on the pre-amp the microphone might require:


12VDC. In this case the microphone has to be powered with a 12V DC power supply. These types of microphones are called LINE LEVEL MICROPHONES (Figure 1).
1.8VDC - 4.5VDC. In this case the Microphone will be powered right from the IP camera itself. These types of microphones are called MIC LEVEL MICROPHONES (Figure 2).

https://www.rise.company/forum/images/imported/2017/10/8.jpgFigure 1 (A line level microphone - LOUROE LE070 connects to IPC audio)Depends on connector's type, the microphone connection may use a 3.5mm stereo jack or RCA connector.
https://www.rise.company/forum/images/imported/2017/10/9.jpgFigure 1 (3.5mm Stereo/RCA Connector)https://www.rise.company/forum/images/imported/2017/10/10.jpgFigure 2 (A mic level microphone - Verifact A-ML connects to IPC)After the microphone has been successfully connected to the camera, users need to change the camera settings to enable audio recording.
Taking Hikvision IPC as an example, users need log in to the camera:
Go to "Advanced Setting" > "Video/Audio" > “Audio" > change the microphone type to "LINE IN" if using a line level microphone, or change the microphone type to "MIC IN" if using a mic level microphone.
https://www.rise.company/forum/images/imported/2017/10/11.jpgIP Camera Audio Setting2# How to choose microphones for video surveillance?

By the way, you may need to choose a suitable microphone for audio monitoring. Typically, users need to know two specifications when selecting the microphone.
microphone types


Omni-directional - the microphone can collect the sound from every corners (360 degree angle).
Unidirectional - A unidirectional microphone is sensitive to sound from only one direction.

microphone sensitivity
It's recommended to choose a high sensitivity, high signal to noise ratio microphone for audio monitoring and recording. If you decide to DIY a microphone, you can choose WM-61A Omni-directional Back Electret Condenser Microphone Cartridge which provides -35+/-4dB high sensitivity.
Product Example: Louroe A-ML microphone
Louore is the world leader in the audio security industry, providing first-class audio monitoring for security applications. Verifact A-ML is an indoor ceiling-mountable monitoring microphone, it adopts Omni-direction and low impedance, electret condenser microphone to provide crystal clear audio. This microphone is housed in a high-compact ABS dome like structure, the A-ML offers the standard pick-up pattern is about 15' from the microphone location in all directions or within a 30' diameter circle. It comes with a 20' cable with a stereo plug on one end for directly connecting to the audio input of an IP camera.
https://www.rise.company/forum/images/imported/2017/10/12.jpgLouroe A-ML Microphone3# How to choose the right Mic cables?

The signal from Microphone is very weak, audio signal can be easily interfered. To avoid the interference, the microphone cable should be as short as possible. Ensuring the high quality audio monitoring, the microphone cables must be shielded and balanced mic cable.



هو شراء كاميرا مدمج معها مايك


المرجع:
https://ipcamtalk.com/threads/enabling-mic-connected-to-audio-in-of-nvr.17707/