Rise Company
05-10-2019, 22:53
حل مشكلة هارد السيرفر server hard state is foreign فى RAID
[SOLVED] How to clear the foreign configuration on a HDD using the Raid Configuration Utility
disk failure in a Dell PowerEdge R710 server - RAID controller in Foreign State
https://www.rise.company/upload/uploads/157030912557911.jpg
حل المشكلة هو اعادة تعريف الهارد مرة اخري فى RAID ولكي يتم ذلك لا يوجد الا حلين اما Import Foreign او clear foreign الاول يقوم باستعادة الاعدادات السابقة التى يعمل عليها الهراد اما الاخر فيقوم بحذف الاعدادات ليجعل الهارد كانه جديد لعمل raid له.
حل المشكلة Import Foreign
Ctrl-R during bootup brings up the BIOS menu for the controller. Go across to Foreign (Ctrl-n), hit F2 for options and choose Import Foreign Config to load previous config from the disks or choose clear foreign config to wipe it and start from scratch.
فى حالة تصحيح خلل الهارد
DELL Ctrl-R import foreign PERC 5,6
https://www.youtube.com/watch?v=ejdVVLgUBhc
فى حالة استبدال هارد اخر
Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. Once in the PERC Configuration Utility use Ctrl+ N to switch between the tabs, below you can see the Virtual Disk Management page and the missing disk.
https://www.rise.company/forum/images/imported/2019/10/13.jpg
The next tab, Physical Disk Management shows the new foreign disk in slot 0.
https://www.rise.company/forum/images/imported/2019/10/14.jpg
The last tab shows the Foreign configuration as well and the current active configuration.
https://www.rise.company/forum/images/imported/2019/10/15.jpg
Now we have orientated ourselves go back to the Virtual Disk Management page, highlight the controller at the top of the screen and press F2 to list the available operations.
https://www.rise.company/forum/images/imported/2019/10/16.jpg
Scroll down and select Foreign Config, another window will pop up with the option to import or clear the configuration. Select Clear.
The warning message below will pop up, select Yes.
https://www.rise.company/forum/images/imported/2019/10/17.jpg
Looking at the Physical Disk Management page, you can now see the replacement disk is Ready.
https://www.rise.company/forum/images/imported/2019/10/18.jpg
Press F2, and then select the option to Make Global HS.
https://www.rise.company/forum/images/imported/2019/10/19.jpg
You can see below that the State has changed to Rebuild.
https://www.rise.company/forum/images/imported/2019/10/20.jpg
Exit the Raid Configuration Utility, reboot your server and the array will rebuild in the background.
[SOLVED] How to clear the foreign configuration on a HDD using the Raid Configuration Utility
disk failure in a Dell PowerEdge R710 server - RAID controller in Foreign State
https://www.rise.company/upload/uploads/157030912557911.jpg
حل المشكلة هو اعادة تعريف الهارد مرة اخري فى RAID ولكي يتم ذلك لا يوجد الا حلين اما Import Foreign او clear foreign الاول يقوم باستعادة الاعدادات السابقة التى يعمل عليها الهراد اما الاخر فيقوم بحذف الاعدادات ليجعل الهارد كانه جديد لعمل raid له.
حل المشكلة Import Foreign
Ctrl-R during bootup brings up the BIOS menu for the controller. Go across to Foreign (Ctrl-n), hit F2 for options and choose Import Foreign Config to load previous config from the disks or choose clear foreign config to wipe it and start from scratch.
فى حالة تصحيح خلل الهارد
DELL Ctrl-R import foreign PERC 5,6
https://www.youtube.com/watch?v=ejdVVLgUBhc
فى حالة استبدال هارد اخر
Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. Once in the PERC Configuration Utility use Ctrl+ N to switch between the tabs, below you can see the Virtual Disk Management page and the missing disk.
https://www.rise.company/forum/images/imported/2019/10/13.jpg
The next tab, Physical Disk Management shows the new foreign disk in slot 0.
https://www.rise.company/forum/images/imported/2019/10/14.jpg
The last tab shows the Foreign configuration as well and the current active configuration.
https://www.rise.company/forum/images/imported/2019/10/15.jpg
Now we have orientated ourselves go back to the Virtual Disk Management page, highlight the controller at the top of the screen and press F2 to list the available operations.
https://www.rise.company/forum/images/imported/2019/10/16.jpg
Scroll down and select Foreign Config, another window will pop up with the option to import or clear the configuration. Select Clear.
The warning message below will pop up, select Yes.
https://www.rise.company/forum/images/imported/2019/10/17.jpg
Looking at the Physical Disk Management page, you can now see the replacement disk is Ready.
https://www.rise.company/forum/images/imported/2019/10/18.jpg
Press F2, and then select the option to Make Global HS.
https://www.rise.company/forum/images/imported/2019/10/19.jpg
You can see below that the State has changed to Rebuild.
https://www.rise.company/forum/images/imported/2019/10/20.jpg
Exit the Raid Configuration Utility, reboot your server and the array will rebuild in the background.