Rise Company
26-10-2021, 22:32
سيرفر ديل Dell Power Edge الغاء رسالة Disable the "F1/F2 Prompt Error" function
dell poweredge stop at strike f1 to continue
https://www.rise.company/upload/uploads/163528026267291.png
المشكلة :
When your PowerEdge server is running with unsupported configurations, the system will stop at each start and request for confirmation by pressing F1 to continue or F2 for entering System BIOS. To avoid this interruption, this function can be disabled.
حل المشكلة :
Change F1/F2 Prompt on 11G and earlier PowerEdge servers To change the F1/F2 Prompt settings, perform the following steps:
Turn on, or restart your system.
Press F2 immediately after you see the following message:
F2 = System Setup
On the System Setup Main Menu screen, use the arrow keys to scroll down to F1/F2 Prompt on Error
Change the setting to the preferred status by using "+" or "-" key.
Press "Esc" to exit and restart the server.
المرجع:
https://www.dell.com/support/kbdoc/en-us/000153098/poweredge-servers-disable-the-f1-f2-prompt-error-function
dell poweredge stop at strike f1 to continue
https://www.rise.company/upload/uploads/163528026267291.png
المشكلة :
When your PowerEdge server is running with unsupported configurations, the system will stop at each start and request for confirmation by pressing F1 to continue or F2 for entering System BIOS. To avoid this interruption, this function can be disabled.
حل المشكلة :
Change F1/F2 Prompt on 11G and earlier PowerEdge servers To change the F1/F2 Prompt settings, perform the following steps:
Turn on, or restart your system.
Press F2 immediately after you see the following message:
F2 = System Setup
On the System Setup Main Menu screen, use the arrow keys to scroll down to F1/F2 Prompt on Error
Change the setting to the preferred status by using "+" or "-" key.
Press "Esc" to exit and restart the server.
المرجع:
https://www.dell.com/support/kbdoc/en-us/000153098/poweredge-servers-disable-the-f1-f2-prompt-error-function