المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : يو بي اس ups موديل APC SMART حل مشكلة apc disable self test / audible alarm



Rise Company
07-11-2021, 15:46
يو بي اس ups موديل APC SMART حل مشكلة apc disable self test / audible alarm
ups apc enable SmartConnect remote commands

https://www.rise.company/upload/uploads/16362927063051.png

Configuration mode
Configuration mode provides the ability to adjust UPS parameters and initiate control actions. To enter
configuration mode hold the MUTE and MENU buttons together for 2 seconds until the system emits a
short beep and the display will flash to indicate the UPS has entered Configuration Mode.
When in Configuration Mode, the MENU button cycles the display through the available options. The MUTE
button toggles the configuration settings for that option.
Note: When the UPS detects 20 seconds of no activity in Configuration Mode, or when the MUTE and MENU
buttons are pressed together for 2 seconds until the system emits a short beep, the UPS returns to Normal mode.

https://www.rise.company/upload/uploads/163629270632782.png

SmartConnect remote
commands
• rc.0: remote control disable
• rc.1: remote control enable When enabled, it allows SmartConnect to send
commands and configuration to

https://www.rise.company/upload/uploads/163629270635883.png

بعد تفعيلها انتظر 10 دقائق حتى يسمع مع الويب
https://smartconnect.apc.com/

المرجع:
https://www.apc.com/shop/eg/en/products/APC-Smart-UPS-1000VA-230V-LCD-8x-IEC-60320-C13-outlets-w-SmartConnect-port/P-SMC1000IC