شرح كيفية الغاء / حذف اوامر الطباعة المعلقة فى البرنتر cancel queued print jobs

شرح كيفية الغاء / حذف اوامر الطباعة فى البرنتر cancel queued print jobs
How to Cancel a Stuck Print Job - How to remove a stuck print job
How to Cancel a Print Job in the Print Queue - How to Forcefully Clear the Print Queue
Canceling a print job -طريقة إلغاء أمر الطباعة - حذف اوامر الطباعه المعلقه

Clear and Restart the Print Spooler Manually

To clear and restart the print spooler manually, you’ll first need to stop the Print Spooler service.
Click Start, type “services,” and then click the Services app.

https://www.rise.company/forum/image...2020/08/11.png

In the right-hand pane of the Services window, find and double-click the “Print Spooler” service to open its properties window.

https://www.rise.company/forum/image...2020/08/12.png

In the properties window, on the “General” tab, click the “Stop” button.
You’ll be restarting the service a bit later, so go ahead and leave this properties window open for now.

https://www.rise.company/forum/image...2020/08/13.png

Fire up File Explorer and browse to the following location—or just copy and paste this text into your File Explorer address bar and hit Enter:
%windir%\System32\spool\PRINTERS You’ll likely be asked to provide permission to access this folder. Go ahead and accept.

كود:

---

%windir%\System32\spool\PRINTERS

---

https://www.rise.company/forum/image...2020/08/14.png

Delete the contents of the entire folder by pressing Ctrl+A and then the Delete key.

https://www.rise.company/forum/image...2020/08/15.png

Now, return to that open properties window in the Services app and click “Start” to restart the Print Spooler service. Click “OK” to close the properties window and you can also go ahead and exit the Services app.

https://www.rise.company/forum/image...2020/08/16.png

As soon as you restart the Print Spooler service, all the documents in your queue are immediately respool


المرجع :
https://www.howtogeek.com/100358/how...s-print-queue/

Clear and Restart the Print Spooler with a Batch File

If clearing your print queue by restarting the Print Spooler service is something you think you’ll be doing more than once—or you’d just rather not go through the trouble of using the Services app—you can also create a simple batch file to do the job.
Fire up Notepad or your preferred text editor. Copy and paste the following text as separate lines into the blank document:

كود:

---

net stop spooler
del /Q /F /S "%windir%\System32\spool\PRINTERS\*.*"
net start spooler

---

https://www.rise.company/forum/image...2020/08/24.png

Next, you’ll save your document as a .bat file. Open the “File” menu and click the “Save As” command. In the “Save As” window, browse to the location you want to save the file. On the “Save as type” drop-down menu, choose the “All files (*.*)” entry. Name your file whatever you like, but include “.bat” at the end. Click “Save” when you’re done.

https://www.rise.company/forum/image...2020/08/25.png

You can now double-click that batch file to clear the print spooler whenever you want. Better yet, create a shortcut to the batch file and then place that shortcut where it makes the most sense to you—desktop, Start menu, or taskbar—and you’ll have one-click access to clear and restart the print spooler whenever you want.

Restart or Cancel Some or All of Your Printing Documents

If clearing and restarting the print spooler didn’t do the trick, the next step you’ll want to take is to see if you can identify—and cancel—whatever document is stuck. Sometimes, clearing a single stuck document will get your printer going again and any other print jobs in the queue can finish printing normally. Other times, you might have to cancel all the currently printing documents and then try printing them again.
Click Start, type “devices,” and then click the “Devices and Printers” Control Panel app.

https://www.rise.company/forum/image...2020/08/17.png

In the Devices and Printers window, right-click the printer you’re having trouble with and then click the
“See what’s printing” command to open the print queue.

https://www.rise.company/forum/image...2020/08/18.png

The print queue window shows the print jobs currently awaiting printing. If a single document is causing the problem and you have more than one document in the queue, it’s usually the earliest document that’s stuck. Click the header for the “Submitted” column so that the documents are arranged in the order they were submitted, with the earliest at the top. Note that in our example, we arranged the columns so they would fit in our screenshot better, so your “Submitted” column may be further to the right.

https://www.rise.company/forum/image...2020/08/19.png

Right-click the earliest print job and then select “Restart” from the context menu.

https://www.rise.company/forum/image...2020/08/20.png

If your printer cranks up and starts printing after restarting the document, you’re good to go. Otherwise, you’ll need to try canceling the document. Right-click the document again and select the “Cancel” command.

https://www.rise.company/forum/image...2020/08/21.png

Click “Yes” to confirm that you want to cancel the document.

https://www.rise.company/forum/image...2020/08/22.png

If the cancellation was successful, the document should disappear from the print queue and the printer will start printing the next document in line. If the document didn’t get canceled at all—or if the document did get canceled but printing is still not happening—you’ll need to try canceling all the documents in the queue. Click the “Printer” menu and then choose the “Cancel all documents” command.

https://www.rise.company/forum/image...2020/08/23.png

All the documents in the queue should disappear and you can try printing a new document to see if it works.