سيرفر اتش بي hp proliant dl360 gen8 لايدعم UEFI / GPT فى اختيارات BIOS

سيرفر اتش بي hp proliant dl360 gen8 لايدعم UEFI / GPT فى اختيارات BIOS
booting HP ProLiant DL360 Gen8 in uefi - HP DL360 Gen8 GPT / MBR problem

https://www.rise.company/upload/uplo...1380865461.jpg

المشكلة :

لا يوجد فى البايوس نظام UEFI وفقط يعمل Legacy ولايوجد اى اختيار للتحويل الى UEFI


السبب :

Gen8, it does not have UEFI support. We only support UEFI in Gen9 and newer.

I just contacted HPE. They confirmed, DL360 G8 (and most G8 servers in general) does not have uefi.
The only exception is DL580 gen8

حل المشكلة :

تغيير السيرفر الى gen 9 او البحث عن تحديث للفيرموير ان وجد

مع العلم تحويل الهارد الى gpt لا يوجد مشكلة به المشكلة فى البوت على uefi

اقتباس:

---

HP DL380e Gen8 not support the UEFI mode, you can find the option in HP Gen 9.
we can say that UEFI boot mode support more than 2 TB storage and Legacy mode support UP to 2 TB, so the solution is below:
For Example:
1. if you have storage 10TB, so create the two raid ( one for window and 2nd for storage )
2. when you choose the partition for windows so make sure there is no any extra partition without these raid.
3. install the window in window raid partition
4. complete the startup setup
5. so when you go to Disk management so there you will see the 2 disk online
one is Raid for storage
second is raid for windows
6. so delete the partition from the disk management of the storage RAID.
7. right click on Disk online > convert to GPT

---

المرجع:
https://serverfault.com/questions/97...0-gen8-in-uefi
https://community.hpe.com/t5/prolian...4#.X3Of3u2xXDc