æíäÏæÒ 10 Windows Íá ãÔßáÉ ÈØìÁ ÇáØÈÇÚÉ æÇÎÐ æÞÊ Øæíá Slow in Printing
Þã ÈÊÛííÑ ÇáÈæÑÊ ãä äæÚ ‘WSD-…….’ ÇáÈØìÁ Çáì ÈæÑÊ ãä äæÚ TCP/IP ÇáÓÑíÚ
create a new standard TCP/IP port and switched the printer off of the WSD port
stop the WSD port from re-installing or from Windows automatically installing a new network printer
Are your print jobs taking a long time to print or not coming
WSD printer port seems to stop users from being able to print?
Are your print jobs taking a long time to print or not coming out at all? We can fix that.
Remove the WSD port and switch to the TCP/IP



ÇáãÔßáÉ :

Ýì æíäÏæÒ 10 ÝÞØ !!! ÚäÏ ÇáØÈÇÚÉ Úáì Çì ãÇßíäÉ ÊÕæíÑ ÞÏíãÉ Çæ ÌÏíÏÉ

ÊÌÏ Çä ÇáæÑÞ íÇÎÐ æÞÊ Øæíá Ýì ÇáØÈÇÚÉ Èíä ßá æÑÞÉ æ ÇáÇÎÑí

æåÐå ÇáãÔßáÉ áÇ ÊÙåÑ Ýì æíäÏæÒ 7 æáßä ÊÙåÑ Ýì æíäÏæÒ 10

ÞÏ ÊÙä Çä ÇáÓÈÈ SMB v1 ÛíÑ ãÝÚá Çæ ÇáãÇßíäÉ ÞÏíãÉ

æáßä Ýì ÇáÍÞíÞÉ ÍáåÇ áíÓ ßÐáß.


Íá ÇáãÔßáÉ :

create a new standard TCP/IP port and switched the printer off of the WSD port

ÇÝÊÍ control panel Ëã ÇÐåÈ Çáì Devices and Printers

Ëã ÇÎÊÑ ÇáÈÑäÊÑ ÇáÎÇÕÉ Èß æÇÏÎá Úáì printer properties

ÊäÞá Çáì Ports Tab Ëã åÊÌÏ Çä åäÇß ÚáÇãÉ ÕÍ Úáì ÈæÑÊ ÈÇÓã ‘WSD-…….’

Þã ÈÊÛííÑ ÇáÈæÑÊ ãä äæÚ ‘WSD-…….’ ÇáÈØìÁ Çáì ÈæÑÊ ãä äæÚ TCP/IP ÇáÓÑíÚ



Ports Tab

Choose the ‘Ports’ tab from the top tabs, and check to see if the printer is set to print to a ‘WSD-…….’
If the printer is NOT set to ‘WSD-……’ then no change is needed,
click [Cancel] and close the window – if it IS set to ‘WSD-…….’ proceed to the next step.



Choose the correct TCP/IP

If your printer is set to ‘WSD-…….’ then if available choose the correct IP Address from the ‘Port’ list
(Nb. you may find it helpful to expand the ‘Ports’ column width to see more of the information in ports)
ensure there is a tick next to the IP address you want to print to.



-------------------------------------------------------------------
ÎØæÇÊ ÊÛííÑ ÇáÈæÑÊ ãä äæÚ WSD ÇáÈØìÁ Çáì TCP/IP ÇáÓÑíÚ

-------------------------------------------------------------------

íÝÖá ÇÓÊÎÏÇã ÇáÊÚÑíÝ ÇáÇÕáí æáßä ÇáÍÏíË æáíÓ ÇáÞÏíã , ÇÐåÈ Çáì ãæÞÚ ÇáÔÑßÉ æÍãá ÇÎÑ ÊÍÏíË ÌÏíÏ !!!

ãËáÇ: åäÇ Ýì Ñíßæ ÇÎÑ ÇÕÏÇÑ åæ


PCL5 if it's XP or PCL6 if it's Vista, 7 or 10

ÍíË ÇÐÇ ÞãÊ ÈÇÓÊÎÏÇã ÇáÈÑäÇãÌ åæ ãä äÝÓå åíÓÊÎÏã ÏÇÆãÇ TCP/IP

æÈÇáÊÇáì Êã Íá ÇáãÔßáÉ, ÇãÇ ÇáØÑíÞÉ ÇáÇÎÑí åæ Çä ÊÖíÝ ÇáÈÑäÊÑ ãä ÌÏíÏ æáßä ÈÇÓÊÎÏÇã ÇáÇí Èí

Click Add Port... and select TCP/IP and enter the IP.
Make that the port it uses for that printer.
Then delete the WSD port

ÔÇåÏ ÇíÖÇ :
æíäÏæÒ 10 Windows ÊÚÑíÝ ÇáÈÑäÊÑ ÈÔßá ÊáÞÇÆí æãÔÇßáå disable/enable WSD discovery

ÇáãÑÌÚ:
https://inception.co.uk/support/prin...windows-update