AnyDesk voice call / enable calls
How do I talk with my PC Mic, to the remote PC?
How to enable voice chat in Anydesk?



as of now Audio transmission is uni-directional. If you want to have bi-directional Audio Transmission a reverse session has to be created.For general information on "Audio", please check out the corresponding Help Center article as well:

https://support.anydesk.com/Audio

Session !
settings Specify device
.

Session
Anydesk
.

The AnyDesk Audio feature allows users to transmit sound from the remote device to the local device.
Warning: Please note that due to macOS security restrictions, users cannot transmit audio from a remote macOS device.
Nevertheless, AnyDesk for macOS clients can still receive audio from non-macOS AnyDesk clients.

While in a session, the local connecting client can enable or disable this feature in the Permissions menu for Windows and Menu for macOS and Linux in the AnyDesk toolbar.



----------------------------------------------
1- Setting up Audio Transmission
----------------------------------------------
MIC


Transmission" sets up which audio device the client transmits when it receives an incoming connection. The default setting will be to use the standard audio device that has been selected in the computer's settings.

Disable No audio transmission
Use standard device Transmits the default audio device set in the computer's settings.
Transmit audio output of this desk Transmits the audio output of all devices on this computer.
Specify device A specific device can be selected for transmission.
It is possible to select a microphone here.

----------------------------------------------
2- Setting up the Audio Output

----------------------------------------------

SUB Speaker
.

Output is responsible for which device the audio is played back on when the client starts an outgoing session.
The default setting will use the standard audio device that has been selected in the computer's settings.

Disable No audio output on this device
Use standard device Use the default audio output device set in the computer's settings.
Specify device A specific device can be selected as audio output
Exclusive audio playback Reduces audio latency but will disable any audio output that doesnt come from AnyDesk.


Windows settings


Setting up the Audio Output settings Audio
.

When using audio transmission, the Windows system settings need to be set up properly.
In case of issues with the transmission, these should be checked first.

The correct default audio devices need to be set up, as this is what AnyDesk uses in its standard configuration.




The windows audio settings are found in
"Windows System Settings" > "System" > "Sounds" and then under "Related Settings"
to the right "Sound Control Panel".








In the "Sound Control Panel" under the "Playback" tab,
it is important the device that is intended to be used for audio output is set as default, by clicking "Set Default".




:

https://www.reddit.com/r/AnyDesk/com...at_in_anydesk/
https://support.anydesk.com/knowledge/audio
https://www.reddit.com/r/AnyDesk/com...the_remote_pc/
https://www.reddit.com/r/AnyDesk/com...audio/hh38lza/