ÇÔåÑ ÇÎØÇÁ ÇáÇíãíáÇÊ æ ÇÓÈÇÈåÇ
Error 421 – Too Many Concurrent SMTP Connections
Error 550 – Please Turn on SMTP Authentication in Your Mail Client



Troubleshooting Common SMTP Errors in cPanel

All being well, you can now send messages from your personalized address via your server. However, email is complicated, and it’s not unusual for misconfiguration to cause authentication or mail delivery issues.
SMTP errors often present themselves as undelivered messages. You try to send an email and get a quick response with an inscrutable error message and a number. In the remainder of this article, we’re going to look at how you or your hosting provider can fix a couple of the most common errors.
Error 421 – Too Many Concurrent SMTP Connections

Exim limits the number of SMTP connections it allows at the same time to stop the server being overwhelmed, but on a busy server, the default cPanel setting of 100 concurrent connections might be too low.
The limit is controlled by the “smtp_accept_max” directive in Exim’s configuration file. You can change this value in WHM by navigating to the Exim Configuration Manager under Service Configuration in the sidebar menu.
Select the Advanced Editor tab and search for “smtp_accept_max.” Adjust the value upwards, but be aware that too many SMTP connections can cause the mail server to run out of memory and crash.
Error 550 – Please Turn on SMTP Authentication in Your Mail Client

When your mail client wants to send messages, it has to supply authentication credentials over a secure connection. If anyone could connect and send messages, your server would quickly become a haven for spammers, so the client has to prove that it is a legitimate sender for that account.
You get an Error 550 message when something goes wrong with the authentication process. There are a few potential causes of this error.
Misconfigured SMTP Client Authentication

Most commonly, Error 550 is caused by either a misconfiguration in the email client or a client so old it doesn’t know how to establish a secure SMTP connection. This is the likely culprit if only one or a handful of users experience the error.
The best way to fix it is to use a modern client with correct authentication details. If that’s not possible, WHM includes a settings tweak to allow SMTP connections from users who have previously authenticated with POP or IMAP, the protocols used to collect messages from the server.
Navigate to the Tweak Settings interface, which is under Server Configuration in the WHM sidebar menu. Search for “Pop-before-SMTP” and activate the tweak.
Incorrect Email Routing for the Domain

If someone gets a 550 error when they try to send a message to an account hosted on your server, there is probably something wrong with the domain’s routing configuration. Typically, this is because the domain is configured to use a remote mail exchanger instead of the one on your server.
To make sure emails for the domain use the local mail exchanger, navigate to Edit MX Entry in DNS Functions in the WHM sidebar menu. Choose the relevant domain and click Edit. Verify that Local Mail Exchanger is selected.
Another potential cause is misconfigured MX records for the domain. These are the DNS records that indicate where mail for a domain should be delivered. You can use the “dig” command-line tool to check if they point to the right IP address.
In this example, we use dig to see where the MX records for our domain point, and then to verify that the domain name record includes the expected IP address.
We have covered the most common causes of 550 errors, but there are a couple of less likely culprits, which you can read about in our SMTP authentication error troubleshooting tutorial.
-----------------------------


Recipient address rejected: User unknown
ÓíÑÝÑ ÇáÈÑíÏ ÇáÐí ÃÑÓáÊ Åáíå ÇáÑÓÇáÉ áÇíÌÏ ÚäæÇä ÇáÈÑíÏ ÇáÐí ÊÑÓáíäå áå ãËáÇð:
Åä ÃÑÓáÊ ÑÓÇáÉ áÜ [email protected] æÑÏ ÈÑäÇãÌ ÇáÈÑíÏ ÈåÐå ÇáÑÓÇáÉ ãÚäÇåÇÇ Ãä ÇáÊåÌÆÉ ÎÇØÆÉ¡ æÎÇÕÉ ÈÇáÞÓã ÇáÐí íÃÊí ÞÈá ÅÔÇÑÉ @ æÚáíß ÊÛííÑå

Unrouteable address
ÇáãÔßáÉ Ýí ÊÝÓíÑ ÚäæÇä ÇáÈÑíÏ¡ æåÐå ÇáãÔßáÉ áÇ ÚáÇÞÉ áßæãÈíæÊÑß ÈåÇ ¡ íÚäí ãÔÇßá ãä ãÒæÏ ÎÏãÉ ÇáÈÑíÏ ÇáÎÇÕ ÈäÇ (ÍÊãÇð) Ãæ ãÒæÏ ÇáÈÑíÏ ÇáãÑÓá Åáíå

Your host is not allowed to connect to this server
ÇáãÔßáÉ ÈÊÓÌíá ÇáßæãÈíæÊÑ ÇáÐí ÊÑÓáíä áå ãÚ ÓíÑÝÑ ÇáÈÑíÏ æåí ãÔßáÉ ÊÃÕíá Authintication ÞÏ íßæä ÇáÓÈÈ åæ ØÈíÚÉ ÇÊÕÇáß ÈÇáÇäÊÑäÊ (ÈÞÕÏ ããßä ÊäÍá ÈÊÛííÑ äæÚ ÇÔÊÑÇß ÇáÇäÊÑäÊ)

The users mailfolder is over the allowed quota
ÃÕíÈ ÕäÏæÞ ÈÑíÏ ÇáãÑÓá Åáíå ÈÇáÊÎãÉ æáã íÚÏ íÍÊãá ÑÓÇáÉ ÌÏíÏÉ

This address no longer accepts mail
ÚÇãáß Èáæß Ãæ ãËá Çááí ÞÈáå ¡ Ãæ ÇáÔÑßÉ ÇáãÓÊÖíÝÉ áÈÑíÏ ÇáãÑÓá Åáíå ÍáÞÊáå

User unknown
ãËá ÇáÎáá ÇáÃæá ¡ ÈÓ åÇáãÑÉ ÃäÊ æåæ Úáì äÝÓ ÇáãÒæÏ

is not a valid mailbox
åäÇß ãÔßáÉ ÈßÊÇÈÉ ÇáÌÒÁ ÇáÃæá ãä ÚäæÇä ÇáÈÑíÏ (ãÇ íÃÊí ÞÈá ÇáÜ @)

does not exist
ßãÇä ãËá ÇáÎáá ÇáÃæá (ãÔßáÉ ÈÇáÊåÌÆÉ)


Sender IP must resolve
áãÇ ÈäÓÊÎÏã ÃäÙãÉ ÈÑíÏ ãÊÎáÝÉ æÛÈíÉ ãËá äÙÇã ÈÑíÏ ÓíÑíÊá ãËáÇð Ãæ ÇáÜ 190 ¡ íßæä ÓíÑÝÑ ÇáÈÑíÏ ÛíÑ ÞÇÏÑ Úáì ÊÍæíá ÚäæÇä ÓíÑÝÑÇÊ ÇáÈÑíÏ Åáì ÃÑÞÇã IP æÊÍá åÐå ÇáãÔßáÉ ÈÃä ÊÞæãí íÏæíÇð ÈÇÓÊÈÏÇá ÚäæÇä ÇáÈÑíÏ ÇáÅáßÊÑæäí ÈÚäæÇä ÇáÜ IP ßÃä ÃÓÊÈÏá in.scs-net.org ÈÜ 213.178.225.21

Address rejected
ÇáãÑÓá Åáíå íÓÊÎÏã ãäÙæãÉ ÈÑíÏ ÎÑÈÇäÉ (ÓíÑÝÑ ÈÑíÏå íÚÇäí ãä ãÔßáÉ)

retry timeout exceeded
åäÇß Òãä ÃÞÕì áãÍÇæáÉ ÅÑÓÇá æßÐáß ÅÓÊÞÈÇá ÇáÈÑíÏ ¡ Åä Êã ÊÌÇæÒå (ÈÓÈÈ Ãä ÎÏãÉ ÇáÇäÊÑäÊ ÌÑÈÇäÉ ØÈÚÇð) ÓÊÙåÑ ååÐå ÇáÑÓÇáÉ

unknown or illegal alias
ÎØà ÈÊåÌÆÉ ÚäæÇä ÇáÈÑíÏ ÃíÖÇð

Bad destination mailbox address
ßÐáß ÇáÃãÑ

SMTP error from remote mail server
íÚäí Çááí ÇÎÊÑÚ ÇáÈÑíÏ ÇÎÊÑÚáäÇ åÐÇ ÇáÚØá¡ ÓÈÈå åæ Îáá ãÑÏå ÅÑÓÇá ÑÓÇáÉ ãä äÝÓ ÇáÈÑäÇãÌ æÚÈÑ ÍÓÇÈí ÈÑíÏ íÊÈÚÇä áãÒæÏí ÎÏãÉ ãÎÊáÝíä.

ÇáãÑÌÚ:
https://blog.cpanel.com/setting-up-a...mtp-in-cpanel/